Nós usamos cookies para melhorar sua experiência de navegação. Ao continuar usando nosso site, você aceita nossa política de cookies.
fechar Close Cookie Notification
Instron
  • Back
  • Home
  • Produtos
    SISTEMAS DE ENSAIOS
    Sistemas Universais de Ensaios
    Durabilidade estrutural
    Sistemas de Ensaios Automatizados
    Sistemas de Ensaios Dinâmicos e de Fadiga
    Crash Simulation
    Máquinas para Ensaios de Torção
    Reômetros e Equipamento para Melt Flow
    Equipamentos para ensaios de impacto pendular ou por queda (Drop Tower)
    HDT e Vicat
    Equipamentos Fora de Produção
    ACESSÓRIOS
    Software
    Células de carga
    Adesão, Atrito, Perfuração
    Câmaras Ambientais e Fornos
    Garras de Tração
    Dispositivos para Flexão
    Pratos de Compressão
    Dispositivos para Área Farmacêutica e Biomédica
    Extensômetros
    Células de carga
    Dispositivos para Área de Microeletrônicos
    Medição de Corpos de Prova e Preparação
    Todos os acessórios
    Catálogo de acessórios
  • Soluções Industriais
    POR MATERIAL POR NORMA POR TIPO DE ENSAIO
    POR INDÚSTRIA
    Automotivo
    Biomédica
    Eletrônica
    materiais
    Compósitos
    Metais
    Plásticos
  • Serviço e suporte
    Instron Remote Technical Support CICLO DE VIDA DE PRODUTOS TREINAMENTO
    SERVIÇOS
    Calibração e verificação
    Assistência de implementação da Instron
    SUPORTE TÉCNICO
    Perguntas frequentes
    Serviços de atualização de software
    RECURSOS
    Manuais
    Localizador de número de série
  • Nossa empresa
    CARREIRAS SALA DE IMPRENSA ASSINE NOSSOS BOLETINS DE NOTÍCIAS
    QUEM SOMOS
    Nossa história
    Unidades
    Acreditações e certificados
    RECURSOS
    Glossário
    Tipos de Ensaio
    Boletins de notícias
    Biblioteca de materiais
    Notícias
    Eventos
    Webinários
    Estudos de caso
  • Fale conosco
  • Brasil
Soluções em ensaios » Por tipo de ensaio » Reologia » ASTM D5930 Tests on Molten Plastics

ASTM D5930 Thermal Conductivity Tests on Molten Plastics

Specimen

  • Pellets

Test Types

  • Rheology

Standard

  • ASTM D5930

Materials

  • Plastics

Business Sector

  • Academic
Entre em ContatoSolicite Um Catálogo De Acessórios
CEAST_SmartRheo_SR50
Thermal Conductivity option for Smart Rheo
  • CEAST_SmartRheo_SR50
  • Thermal Conductivity option for Smart Rheo
  • DESCRIÇÃO
  • Literature

The thermal conductivity of molten plastics is an important material property from the point of view of plastics processing, since it affects temperature distribution and cooling behavior of the melt. This information is vital for reliable process simulation of extrusion and injection moulding processes and can lead to increased productivity and better quality of finished product. Using a dedicated thermal conductivity accessory with the SR50 capillary rheometer and following the ASTM D5930 transient-line source technique, we measured the thermal conductivity of selected samples of Low Density Polyethylene (LDPE), Polystyrene (PS) and Polycarbonates (PC). The measurements were carried out under typical conditions of temperature and pressure for plastics processing, up to 300 °C and 200 MPa (572 °F and 29,000 psi).

The test is performed by insertion of the thermal conductivity probe into the melt. According to the standard, the probe shall be in the shape of a needle with an elevated length-to-diameter ratio, hosting a thermocouple and a heating wire. The diameter of the surrounding sample shall be large enough to allow for a significant heat transmission without striking the boundaries. The test is then executed by recording the heat emitted by the line source and the corresponding heat absorption of the needle. The difference between the two is the heat absorbed by the melt, and can be used as a measure of conductivity. The SR50 configuration that we used is not only compliant with this standard but even with the more restrictive ISO 22007-1. It is also managed by the same Visual Rheo software used to control the rheometer and run other types of tests. Calibration is performed against a sample of known and certified thermal conductivity.

LDPE and PS were tested at temperatures and pressures ranging from 180 to 200 °C, and 5 to 200 MPa. During this transition, we noticed an increase in thermal conductivity of 35% (PS) and 45% (LDPE). Meanwhile, comparing measures taken at the same pressure, the effect of different temperatures was not very significant.

PC saw a significantly reduced thermal conductivity, however, with results showing only a 15% increase between 60 and 200 MPa at 300°C. The PS and LDPE showed increases of 20% and 30% in the same pressure range.

Measured values of thermal conductivity ranged from 0.22 to 0.32 W/(m*K) for LDPE, from 0.16 to 0.22 W/(m*K) for PS, from 0.24 to 0.28 W/(m*K) for PC.

For all the samples tested, an increase of pressure produces a significant increase of thermal conductivity, whereas an increase of temperature alone doesn't have significant effects. This information can be used to optimize the choice of materials and the processing parameters.

CEAST SmartRHEO Series: Capillary Rheometer Systems

Thermoplastic materials are processed as fluids under the effect of temperature and pressure. The ability of plastics to be formed into a wide variety of shapes, by the common plastics conversion processes, has a fundamental importance in polymer science and application. The innovative Instron® line of CEAST SmartRHEO Series of Capillary Rheometer systems are designed for an accurate investigation of the rheological properties of polymeric materials.

  • Produtos
  • 9/22/2014
  • 3.5 MB

SELETOR DE REGIÃO

Dismiss Region Selector

Americas

  • North America
  • Brasil
  • South America

All Other Countries

  • Global Site

Europe

  • France
  • Deutschland
  • Italia
  • Polska
  • España
  • Türkçe
  • United Kingdom

Asia Pacific

  • 中国
  • India
  • 日本
  • 대한민국
  • 台灣
  • ประเทศไทย
Instron Logo White
INFORMAÇÕES DE CONTATO

Rua Quirino Zagonel, 257,
São José dos Pinhais,
PR, CEP 83020-250

Vendas:  (41) 3035-9400

Serviços:  (41) 3035-9400

Geral:  +55 41 3035-9400

LINKS ÚTEIS
  • Sistemas de ensaio
  • Software
  • Acessórios
  • Catálogo
  • Glossário
  • Biblioteca
  • Soluções de Ensaios
  • Boletins de notícias
  • Webinários
  • Estudos de caso
  • Eventos
  • Carreiras
Policies / Legal
  • Política de Cookies e Privacidade
  • Termos de uso
  • Controle de exportação
  • Aviso de dados segundo o GDPR
CONECTE-SE CONOSCO
INSCREVA-SE PARA NOSSO BOLETIM DE NOTÍCIAS
ENDEREÇO DE E-MAIL
© 2019 Illinois Tool Works Inc. Todos os direitos reservados.
[email protected]
  • Política de Cookies e Privacidade
  • Termos de uso
  • Controle de exportação
  • Aviso de dados segundo o GDPR