ISO 7206-4, 7206-6, and 7206-8 Endurance and Fatigue Testing Artifical Hip Implant Prostheses
Following surgery, proximal loosening and stress shielding can occur as a result of normal activity and can lead to abnormal loading profiles. Fatigue testing of hip implants is used to determine the endurance properties by simulating the dynamic loading of the implant during gait.
ISO standards have been established to test for both abnormal and normal fatigue loading.
- ISO 7206-4: simulates loading when proximal loosening has occurred. Loads are applied through the femoral head of the hip implant to induce compressive, bending and torsional stresses.
- ISO 7206-6: examines fatigue of the implant neck, which is more consistent with a correctly fixed implant subjected to normal in vivo loading.
- ISO 7206-8: specifies the endurance performance of the implant with the application of torsion
Our Femoral Fatigue Fixture was designed to meet and exceed the requirements of the ISO tests. The fixture includes a low-friction loading head and adapters for mounting to an ElectroPuls™ All-Electric Dynamic Test Instrument. The fixture can also be easily adapted to suit other testing machines and test setups. The flexible specimen holder accommodates a wide variety of hip geometries, offset angles, embedding materials, and embedding depths. Specimens are potted into the holder using an optional embedding fixture to maintain alignment during the potting process.
Additionally, the fixture accommodates a small environmental chamber for complete in vivo simulation.
Hip Femoral Fatigue Fixture ISO 7206
The hip femoral fatigue fixture was specifically designed to meet the enhanced requirements of ISO 7206-4. The fixture simulates the fatigue loading of a hip stem during a gait cycle.
- Aplicações
- 5/31/2016
- 400.1 KB
$name
- Produtos
- 8/3/2015
- 21.7 MB
ElectroPuls™ E3000 All-Electric Dynamic Test Instrument
The ElectroPulsTM E3000 is a state-of-the-art, all-electric test instrument designed for dynamic and static testing on a wide range of materials and components. It includes Instron® advanced digital control electronics, DynacellTM load cell, Console software, and the very latest in testing technology–hassle-free tuning based on specimen stiffness, electrically operated crosshead lifts, a T-slot table for flexible test set ups and a host of other user-orientated features. Powered from a single-phase supply it requires no additional utilities for basic machine operation (for example, pneumatic air, hydraulics, or water).
- Produtos
- 3/3/2017
- 0.7 MB
ElectroPuls™ E3000 Linear-Torsion All-Electric Dynamic Test Instrument
The ElectroPulsTM E3000 Linear-Torsion is a state-of-the-art, all-electric test instrument designed for dynamic and static testing on a wide range of materials and components. It includes Instron® advanced digital control electronics, bi-axial DynacellTM load cell, Console software, and the very latest in testing technology – hassle-free tuning based on specimen stiffness, electrically operated crosshead lifts, a T-slot table for flexible test set ups and a host of other user-orientated features. Powered from a single-phase supply it requires no additional utilities for basic machine operation (for example, pneumatic air, hydraulics, or water).
- Produtos
- 3/3/2017
- 0.7 MB
ElectroPuls E10000 All-Electric Dynamic Test Instrument
The ElectroPulsTM E10000 is a state-of-the-art, all-electric test instrument designed for dynamic and static testing on a wide range of materials and components. It includes Instron® advanced digital control electronics, DynacellTM load cell, Console software, and the very latest in testing technology – hassle-free tuning based on specimen stiffness, electrically operated crosshead lifts, a T-slot table for flexible test set ups and a host of other user-orientated features. Powered from a single-phase supply it requires no additional utilities for basic machine operation (for example, pneumatic air, hydraulics, or water).
- Produtos
- 3/3/2017
- 0.7 MB
ElectroPuls™ E10000 Linear-Torsion All-Electric Dynamic Test Instrument
The ElectroPulsTM E10000 Linear-Torsion is a state-of-the-art, all-electric test instrument designed for dynamic and static testing on a wide range of materials and components. It includes Instron® advanced digital control electronics, bi-axial DynacellTM load cell, Console software, and the very latest in testing technology – hassle-free tuning based on specimen stiffness, electrically operated crosshead lifts, a T-slot table for flexible test set ups and a host of other user-orientated features. Powered from a single-phase supply it requires no additional utilities for basic machine operation (for example, pneumatic air, hydraulics, or water).
- Produtos
- 3/7/2017
- 0.6 MB