Nós usamos cookies para melhorar sua experiência de navegação. Ao continuar usando nosso site, você aceita nossa política de cookies.
fechar Close Cookie Notification
Instron
  • Back
  • Home
  • Produtos
    SISTEMAS DE ENSAIOS
    Sistemas Universais de Ensaios
    Durabilidade estrutural
    Sistemas de Ensaios Automatizados
    Sistemas de Ensaios Dinâmicos e de Fadiga
    Crash Simulation
    Máquinas para Ensaios de Torção
    Reômetros e Equipamento para Melt Flow
    Equipamentos para ensaios de impacto pendular ou por queda (Drop Tower)
    HDT e Vicat
    Equipamentos Fora de Produção
    ACESSÓRIOS
    Software
    Células de carga
    Adesão, Atrito, Perfuração
    Câmaras Ambientais e Fornos
    Garras de Tração
    Dispositivos para Flexão
    Pratos de Compressão
    Dispositivos para Área Farmacêutica e Biomédica
    Extensômetros
    Células de carga
    Dispositivos para Área de Microeletrônicos
    Medição de Corpos de Prova e Preparação
    Todos os acessórios
    Catálogo de acessórios
  • Soluções Industriais
    POR MATERIAL POR NORMA POR TIPO DE ENSAIO
    POR INDÚSTRIA
    Automotivo
    Biomédica
    Eletrônica
    POR INDÚSTRIA
    Automotivo
    Biomédica
    Eletrônica
  • Serviço e suporte
    INSTRON CONNECT CICLO DE VIDA DE PRODUTOS TREINAMENTO
    SERVIÇOS
    Calibração e verificação
    Assistência de implementação da Instron
    SUPORTE TÉCNICO
    Perguntas frequentes
    Serviços de atualização de software
    RECURSOS
    Manuais
    Localizador de número de série
  • Nossa empresa
    CARREIRAS SALA DE IMPRENSA ASSINE NOSSOS BOLETINS DE NOTÍCIAS
    QUEM SOMOS
    Nossa história
    Unidades
    Acreditações e certificados
    RECURSOS
    Glossário
    Tipos de Ensaio
    Boletins de notícias
    Biblioteca de materiais
    Notícias
    Eventos
    Webinários
    Estudos de caso
  • Fale conosco
  • Brasil
PRODUTOS » Sistemas de Ensaios » Structural Durability » Structural Durability Products » Sensors

Sensors

Menu
  • Structural Durability Products
    • Controller Labtronic® 8800ml
    • Hydropuls® actuators
    • Power Packs and Accessories
    • Sensors
    • Servo valves
    • Test frames and fixtures
Contact Us
Load Cell
loadcell
  • Load Cell
  • loadcell
  • DESCRIÇÃO
  • Related Products
  • Software

Challenge

Durability testing requires a range of transducers that can provide critical feedback signals to the controller under dynamic loading conditions. As safety critical components, sensors need to be fatigue rated to survive the cyclic loads they experience during normal operation. Transducer calibration over the full measurement range needs to be accredited, repeatable and stable in order to guarantee the integrity of the test results. Test applications typically require special transducer designs to meet the demanding service loads and range of operational conditions.

Solution

Instron design and manufacture a wide range of transducers to meet the specific demands of test applications.  Sensors are available for static and dynamic force, torque, displacement, pressure, strain, acceleration and temperature measurement. All Instron transducers are suitable for use as control feedback sensors or for data acquisition of test results. Instron has accredited calibration laboratories and is able to provide on-site traceable calibration of force transducers to international standards.

Load Cells

Instron precision load cells are used to determine static and dynamic tensile and compressive forces, which are usually built up by a load unit and transferred to a test specimen. Together with measuring amplifiers, they form a highly accurate measuring system for the material and component testing as well as for vibration resistance tests in the force change range. On account of the different sizes, they can be selected correspondingly to the respective load units.

Torque transducer

The torque transducer PM-T allows a torque measurement on Hydropuls® rotary cylinders in conjunction with the measuring amplifier. In the torque transducer PM-T, a mechanical torque is converted into an electrical resistance change. The measuring amplifier converts this resistance change into an electrical voltage.

Axle Test System

Axle test rigs are used to reproduce different loads applied to the axle elements when a vehicle is traveling over a variety of road surfaces. Instron can provide models for testing of car, van, truck and bus axles with 6 degree-of-freedom.

Component Test Systems

Instrons component testing systems are characterized by the highest quality and reliability, ensuring the highest productivity in daily use.

Multi-Axis Shaking Table (MAST)

Multi-axis simulation (MAST) tables are designed for testing of a variety of different specimens in six degrees of freedom. These include components and subassemblies exposed to vibratory loads during vehicle operation; from seats, dashboards and interior equipment components to engine mounts, and cooling modules.

Road Simulator

HYDROPULS® road simulators are a versatile and cost efficient solution for testing load inputs through the tires. They are used to perform durability tests, as well as acoustic and vibration analyses in testing and development (BSR, NVH) on complete vehicles, subsystems and power train assemblies.

Full Vehicle Test System

Instron offers comprehensive solutions with and without vehicle restraint, with long- or short-stroke introduction of lateral forces as well as the optional environmental simulation with regard to temperature humidity and sun loading.

Biaxial Wheel Test System (ZWARP)

The Biaxial Wheel Test (ZWARP) developed by Instron includes an additional hydraulic actuator which allows a controlled and highly accurate adjustment of the angle of attack to produce high lateral forces.

Dynamic Torsion Test System

The dynamic torsion test stand is designed for the operational fatigue testing of torsional vibration dampers under rotational speed.

Shock Absorber Test Systems

Instron's MSP test system is the ideal tool for reliable, fast and realistic tuning of vehicle chassis designs and development of shock absorber systems.

Elastomer Test System VHF and MHF

The MHF and VHF excel outstanding flexibility and the capability to adapt to constantly changing requirements of the viscoelastic properties of elastomeric suspension and chassis components. They are designed specifically for optimum testing of these components to establish their dynamic characteristics.

RSLabSite modulogic

All you need for your durability tests is the measurement data obtained from the proving ground – RS LabSite® modulogic will do the rest!

SELETOR DE REGIÃO

Dismiss Region Selector

Americas

  • North America
  • Brasil
  • South America

All Other Countries

  • Global Site

Europe

  • France
  • Deutschland
  • Italia
  • Polska
  • España
  • Türkçe
  • United Kingdom

Asia Pacific

  • 中国
  • India
  • 日本
  • 대한민국
  • 台灣
  • ประเทศไทย
Instron Logo White
INFORMAÇÕES DE CONTATO

Rua Quirino Zagonel, 257,
São José dos Pinhais,
PR, CEP 83020-250

Vendas:  (41) 3035-9400

Serviços:  (41) 3035-9400

Geral:  +55 41 3035-9400

LINKS ÚTEIS
  • Sistemas de ensaio
  • Software
  • Acessórios
  • Catálogo
  • Glossário
  • Biblioteca
  • Soluções de Ensaios
  • Boletins de notícias
  • Webinários
  • Estudos de caso
  • Eventos
  • Carreiras
Policies / Legal
  • Política de Cookies e Privacidade
  • Termos de uso
  • Controle de exportação
  • Aviso de dados segundo o GDPR
CONECTE-SE CONOSCO
INSCREVA-SE PARA NOSSO BOLETIM DE NOTÍCIAS
ENDEREÇO DE E-MAIL
© 2019 Illinois Tool Works Inc. Todos os direitos reservados.
[email protected]
  • Política de Cookies e Privacidade
  • Termos de uso
  • Controle de exportação
  • Aviso de dados segundo o GDPR